Dillon Model X-PP Force Gauge (compression / tension)
With the Dillon Model X-PP Force Gauge, compression is measured using a hardened ball, which rotates to maintain vertical alignment as pressure increases. The ball is held in place via a spring clip or retainer, and a threaded mounting hole is located opposite the loading ball at the bottom of the beam. For tension measurements you use the lifting eyes that thread into the top & bottom of the unit.
All push-pull gauges are supplied with a compression-loading spherical ball fitting for compression loading & lifting eyes for tension loading.
SPECIFICATIONS
Measurement mode
Compression/Tension
Capacity
From 0-50 lb up to 2,500 lb (0-50 kg up to 1,000 kg
Accuracy
2% Combined tension & compression scale capacity
Maximum Load Indication
No
Case
Yes
Analog or Digital
Analog
Resources
Yes, traceable to NIST (National Institute of Standards and Technology).
+/-2% of combined tension and compression scale capacity.
Force gauges are not recommended for use under shock load conditions.
No. The optional Max Hand feature is not available on the X-PP Force Gauges
We recommend calibration every 12 months.
Mail your device to:
Dillon/Quality Plus, Inc.
214 E. Kansas St.
Liberty, MO 64068
Yes, please go to https://dqplus.com/rma-form/ to complete and submit an RMA form.
Advantages of the Dillon Model X-PP Force Gauge
Let’s Talk
Want to learn more about the Dillon Model X-PP Force Gauge? Fill out the form and we’ll get back to you as soon as possible.
Sales:
Service:
